钢珠马莲DIY制作PVC热收缩
非常经济适用的制作
我的汉巴仁在打印约800奥本的印象后,相当于一个PVC收缩包装封面-没有明显的磨损。
不时它已经很难获得优质takenokawa(竹壳)用于恢复我的巴伦斯。 For some time I've wondered about alternativematerials for baren covers, especially about using heat shrinktubing.一段时间以来我一直想知道的巴人盖的替代材料,特别是有关使用热缩管。 I bought some six inch wide clear layflat PVCheat shrink tubing (12 inch circumference), cut a length about 21/2 times the diameter of my baren, trimmed the ends to makethinner handles and… It seems to have worked pretty well,actually!我买了一些6英寸宽的清晰吹塑,PVC热缩套管(12英寸周长),切成长度为巴朗我大约21/2倍的直径,修剪的两端,使更薄的把手和...它似乎工作得很好,居然! Covering a baren with takenokawa the traditionalway requires a lot of practice and somedexterity.涵盖了巴人与takenokawa的传统方式需要大量的练习和一些灵巧。Coveringa baren with PVC heat shrink tubing seems to require very littleskill or dexterity — as long as you don't over heat the material(or the baren!) it seems prettyfool-proof.覆盖与PVC热缩套管巴伦一人似乎都需要很少的技能或灵巧 -(!或巴人),只要你不要过度加热材料似乎很傻瓜的证明。
Theparticular PVC heat shrink tubing I acquired seems a bit too thinor light weight (5 mil) for abaren.我获得了特定的PVC热缩套管的巴人似乎有点太细或重量轻(5密耳)。 Even so, less flexible than takenokawa but seemshardier.即便如此,也比takenokawa不太灵活,但似乎强壮。 Hardiness is good because the shrink-wrappedbaren is completely encased front and back so it's impossible torotate the baren during printing so all wear occurs where the highpoints of the coil press the shrink wrap against the paper andblock.抗寒性还是不错的,因为收缩包装巴人完全包裹正面和背面所以不可能在打印过程中旋转巴人,因此所有的磨损发生在那里的高点线圈记者对纸和块的收缩包装。
Whenlubricated with camellia oil, the PVC covering glides over thepaper with about the same 'feel' as takenokawa, though because it'scompletely non-absorbent and glossy smooth, it seems to run dry oflubricant faster than takenokawa and then frictionincreases…当与山茶花油,聚氯乙烯覆盖滑过具有大致相同的'感觉'作为takenokawa纸,润滑,但因为它是完全非吸收性和光泽光滑,似乎跑干膜润滑剂比takenokawa更快,然后摩擦增大...
I thinkI'll eventually be able to find a shrink tubing with more idealcharacteristics — in the meantime, this stuff seems to work betterthan I'd expected.我想我会最终能找到一个热缩套管具有较为理想的特性 -在此期间,这东西似乎更好地工作比我的预期。
我的汉巴人与PVC收缩包装背面-因为包装是PVC的管子,背面还包裹。
准备涵盖了自制珠链巴伦- PVC收缩管已被修剪
线圈(上热熔胶及纸背珠链)和备份(胶合板打磨成平缓凸起的形状)
线圈和背衬管内和管栓形成手柄两端
准备收缩-热风枪和把新巴朗管
谨慎地运用热先备份,然后到前台-过多的热量和PVC会融化。
完成包装工作-边处理
办理收缩包装珠链巴伦侧
收缩包装珠链巴伦工作侧
梦想与现实之间的磨合让我读懂很多生活的语言,风虽改变了方向,却没有改变我的行程-----
来源网址:_感谢独茂兰石授权转载,再转请保留本信息。
-
年09月26日
之间的间隙日本纸版画上版3019.7x13.5厘米£65路口日本纸版画上版3019.8x14.8厘米£65上述流量我木刻上手工纸18x18cm£70上述流量II木刻上手工纸18x18cm£70梦想与现实之间的磨合让我读懂很多生活的语言,风虽改变了方向,却没有改变我的行程...
-
Chronis Delivorias吸油纸油画
梦想与现实之间的磨合让我读懂很多生活的语言,风虽改变了方向,却没有改变我的行程-----来源网址:_感谢独茂兰石授权转载,再转请保留本信息。...
-
Chronis Delivorias吸油纸油画
梦想与现实之间的磨合让我读懂很多生活的语言,风虽改变了方向,却没有改变我的行程-----来源网址:_感谢独茂兰石授权转载,再转请保留本信息。...
-
Chronis Delivorias吸油纸油画
梦想与现实之间的磨合让我读懂很多生活的语言,风虽改变了方向,却没有改变我的行程-----来源网址:_感谢独茂兰石授权转载,再转请保留本信息。...
相关文章
- DIY热缩片制作手工滴胶热缩教程
- DIY:PVC管制作的儿童接水玩具
- 幼儿手工制作小动物 DIY可爱猫咪PVC粘贴画的做法
- 立体热缩·马蹄莲手工滴胶热缩教程
- 【复联CP超轻粘土】美国队长&钢铁侠之钢铁侠 DIY手工制作粘土陶艺教程
- pixiv,p站插画师VIVID雨希的唯美浪漫田园插画图片小制作
- PVC管PVC板 DIY加特林机枪模型的做法教程
- 实用的PVC管材制作笔记本支架手工DIY图解教程
- 苏查内克展出的梦想和激情Suchánek vystavil sny a vá&
- 教你用PVC管DIY自制水下拍摄手把底座灯架小制作